MESHOPIAModel sheet · for your workshop
RC & Robotics
RC helicopter skid clamp
Authorship, licence & source
- Original author
- 3Drotorlab
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 5 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1374650
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Aircraft, Helicopters & Drones
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
HeliGrip RC helicopter skid clamps are designed for the secure transport and storage of RC helicopters. These clamps lock onto the helicopter's landing skids to provide stability during travel or while organizing a hangar. 1. Purpose: The system is intended to secure helicopter landing skids for safer transport and organized storage. 2. Practical Uses: They can be used to lock a helicopter in place while hitting the road or when storing equipment in a hangar. 3. Included Parts: The model files include various clamp components: RC helicopter skid clamp bottom short, Rc helicopter skid mount double bottom v1, RC helicopter skid clamp bottom, RC heilcopter skid clamp Bottom TPU insert, and RC helicopter skid clamp top TPU insert. 4. Printing and Assembly Guidance: The author suggests printing the main clamps in solid PLA, though ABS or PETG are recommended if heat resistance is needed for use inside a hot vehicle. The TPU inserts should be printed with 0.8mm top and bottom layers and 0.8mm outer walls. To complete the assembly, M4X12 or longer bolts are required.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.