Información del modelo
Descripción
RC Fuel Line Shut off
Purpose
This model is designed to function as an RC fuel line shut-off mechanism.
Practical Uses
According to the author, this component is intended to suit 5mm OD silicon tubing.
Included Parts
- Fuel line clamp3.stl
Printing and Assembly Guidance
The author recommends using PETG filament. For printing on a K1 Max, the author used a speed of 100 and a temperature of 235°C. The model should be laid on its side during printing. Supports are required; the author specifically used Tree strong supports.
Texto original del autor en Printables
<p>RC Fuel Line Shut off </p><p>I will suit 5mm OD silicon tubing</p><p>I have used Petg filament </p><p>I used 100 speed @235deg (K1 Max)<br>Lay on the side supports are required <br>Tree strong was used</p>
Preguntas y aportaciones