Información del modelo
Descripción
RC Foam Tyre Inserts for Proline Hyrax 120mm. These inserts feature rims designed with two rows of weights. The author intends for these to improve side tilt compared to original inserts and notes they are suitable for heavy cars; the author's own vehicle weighs approximately 7kg. 1. Purpose: To serve as foam tyre inserts for Proline Hyrax 120mm wheels, specifically designed to assist with heavy RC vehicles and improve side tilt. 2. Practical Uses: Designed for heavy RC cars (author's example is 7kg) to improve stability and side tilt. 3. Included Parts: The files include Insert_v1.1.stl, as well as .3mf files for front and rear configurations (Insert_front_v1.1.3mf and Insert_rear_v1.1.3mf). Gcode files for MK3S are also provided. 4. Printing/Assembly Guidance: The author recommends using Filament PM - TPE 88 RubberJet Flex. For front wheels, use 2 bottom layers. For rear wheels, use only infill. The provided .3mf files contain modifiers that allow the user to choose between bottom layers, infill, or top layers based on their specific model and testing results.
Texto original del autor en Printables
<p>RC Foam Tyre Inserts - for Proline Hyrax 120mm. Rims with two rows of weights.</p><p>Printed from Filament PM - TPE 88 RubberJet Flex</p><p>Its for heavy cars. My car is about 7kg. I expect an improvement in the side tilt compared to the original insert.</p><p>I have insert for front wheels with 2 bottom layers. For rear wheels only infill. You can find it with modificators in .3mf</p><p>You can choose the bottom layers, infill, or even the top layers according to your model and test.</p>
Preguntas y aportaciones