MESHOPIAModel sheet · for your workshop
RC & Robotics
RC Foam Tyre Inserts for Proline Hyrax 120mm
Authorship, licence & source
- Original author
- Milda2107
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 3 files · STL · 3MF
- Declared source
- Printables
- Source link
- https://www.printables.com/model/323447
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Project type
- Functional RC
- Part type
- Wheels / Tires / Tracks
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
RC Foam Tyre Inserts for Proline Hyrax 120mm. These inserts feature rims designed with two rows of weights. The author intends for these to improve side tilt compared to original inserts and notes they are suitable for heavy cars; the author's own vehicle weighs approximately 7kg. 1. Purpose: To serve as foam tyre inserts for Proline Hyrax 120mm wheels, specifically designed to assist with heavy RC vehicles and improve side tilt. 2. Practical Uses: Designed for heavy RC cars (author's example is 7kg) to improve stability and side tilt. 3. Included Parts: The files include Insert_v1.1.stl, as well as .3mf files for front and rear configurations (Insert_front_v1.1.3mf and Insert_rear_v1.1.3mf). Gcode files for MK3S are also provided. 4. Printing/Assembly Guidance: The author recommends using Filament PM - TPE 88 RubberJet Flex. For front wheels, use 2 bottom layers. For rear wheels, use only infill. The provided .3mf files contain modifiers that allow the user to choose between bottom layers, infill, or top layers based on their specific model and testing results.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.