MESHOPIAModel sheet · for your workshop
RC & Robotics
RC car GECKO test part
Authorship, licence & source
- Original author
- PrintFully3D.com
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/63556
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Cars, Crawlers & Off-road
- Project type
- Functional RC
- Scales
- 1:10
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
RC car GECKO test part
Purpose
This component serves as a calibration and test part for the GECKO 1:10 scale expedition RC crawler. It is designed to verify if a printer is properly set up to handle the complexity of the full GECKO model. Specifically, it allows users to test their ability to remove supports and achieve precise tolerances before committing to the complete build.
Practical Uses
Users can utilize this part to assess their printing experience and ensure their machine can produce the detailed components required for the full car. A primary use is testing bearing fitment; the part is designed to verify if a 10x15x4mm bearing can be inserted so that it fits securely without being loose.
Included Parts
- Mask v12.stl
- Bearing test.stl
Printing and Assembly Guidance
It is suggested to print this part to determine if you can easily remove supports from the model. For assembly testing, attempt to insert a 10x15x4mm bearing into the printed part. According to the author, the bearing must fit while remaining snug and not loose. Detailed user guides are available in English and Czech via the provided documentation links.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.