Información del modelo
Descripción
RC Car Body Post Cushion
Purpose
This model is an RC car body post cushion designed to support a polycarbonate body once it is mounted on posts. It serves as an alternative to using traditional body clips combined with pieces of foam.
Practical Uses
These cushions are intended to rest the polycarbonate body on the mounting posts. While the design lacks a small curve at the top, the author suggests this can be achieved by applying heat to prints made from PLA or PETG to create a permanent curve.
Included Parts
- RC car body post cushion (STL file)
Printing and Assembly Guidance
The author recommends using TPU as the best material for this part. Successful print tests were conducted using the following settings:
- Fiberlogy MattFlex 40D TPU: 4 walls and 100% infill.
- PETG: 4 walls and 100% infill.
- PLA+: The author notes that PLA+ should also work for this application.
Texto original del autor en Printables
<p>This is an RC Car body Post cushion that is usually used to rest the Polycarbonate Body once mounted on the Posts instead of only using the Body clips and a piece of foam. </p><p>It's a very simple design, Nothing Special and the dimension is almost exactly like the ones that are usually bought from the local Hobby shop or from the Internet. the only difference is that they Don't have that small curve at the Top but I think it is easily done if printed with PLA or PETG and using heat to make a permanent curve. I needed another Set and my local hobby shop didn't have any so I didn't want to wait for at least a week to get a set posted to me. </p><p>I printed Mine with Fiberlogy MattFlex 40D TPU</p><p>4 Walls</p><p>100% Infill</p><p>I also tried them with PETG with the same number of walls as above, including Infill, PLA+ should also work But I think TPU is the best material for it.</p><p> </p><p> </p><p> </p>
Preguntas y aportaciones