Información del modelo
Descripción
RC Car Axle
Purpose
This model is a replacement axle designed for an RC Mustang. The author created this part to replace a broken original component, aiming for a tight fit to prevent movement during operation.
Practical Uses
It is intended for use in RC cars. While designed for a Mustang, the author notes it should work for most RC cars, provided the hole sizes are adjusted to fit the specific vehicle type.
Included Parts
- Mustang Axle.stl
Printing and Assembly Guidance
The author suggests that hole sizes may need to be adjusted to ensure compatibility with specific vehicle types. Regarding durability, the author notes that the cylindrical pieces may be prone to breakage under heavy use or 'abuse.' A potential remix or improvement could involve adding more support to these cylindrical sections to increase longevity. During 'torture testing' involving rocks, dirt, and water, the part lasted approximately 40-60 minutes before breaking.
Texto original del autor en Printables
<p>This is an axle for any RC car depending on what type you have. It should work for most cars, and you can adjust the hole sizes if needed. This took a lot of iterations because I wanted it to be a tight fit for my car so it wouldn't move around. Other than that, I just modeled it first try! One thing I would want to improve or someone can do a remix is adding more support on the cylindrical pieces because they can break after a long while after “abusing” a lot. I torture tested the axle by driving it over rocks and dirt and water, and broke after like 40-60 minutes. </p>
Preguntas y aportaciones