Model information
Description
RC Boat Camera Enclosure and Radar Tower
Purpose
This kit is designed to add realism to RC boat models. It includes an FPV camera enclosure and a radar tower assembly.
Practical Uses
The camera enclosure is specifically designed to fit the AKK KC04 5.8G camera. The radar components are printed as separate pieces to facilitate the placement of brand logos, which can be glued on after printing. The author noted that FURUNO and FLIR logos were printed and glued separately.
Included Parts
- Flir Camera RC Boat (3mf)
- Rescue Boat Tower (3mf)
Printing and Assembly Guidance
The author recommends using ABS for these parts due to environmental exposure and higher temperatures. For the tower, it is suggested to print it standing up using tree supports. The radar components are not joined during printing to allow for the easy application of logos.
Original text by the author on Printables
<p>Given the exposure to higher temperatures and the environment I used ABS for these parts. Tower prints better standing up with tree supports. The radar will not be joined in order o facilitate the placement of any brand logos (easily glued afterwards). The FURUNO and FLIR logos were printed and glued separately as I am not sure what the brand implications are.</p>
Questions and contributions