Model information
Description
RC 1/8 Subaru WRX Front and Rear LED Lights
Purpose
These components are designed to provide LED lighting for a Delta Plastik USA Subaru WRX 1/8 scale body. They are intended for use on 1/8 scale buggies, both nitro and electric.
Practical Uses
These parts are used to add scale lighting effects to RC rally vehicles, specifically for night rally scenarios.
Included Parts
The model includes files for:
- Hood LED components (4x)
- Front light components
- Rear light components
Required Components
To complete the lighting setup, the following LEDs are required:
- Rally night headlights: 4pcs 20mm 3W LED spotlights.
- Front lights: 2x 5mm super LED and 1x 3mm super LED.
- Rear lights: 2x 3mm super LED.
The author notes using an RC car lightset from AliExpress (approximately 10€).
Printing and Assembly Guidance
For printing, the author suggests using PLA impact, TPU, or PETG. Recommended print settings include 100% infill and a 0.2 layer height.
Attribution: RCMAN79
Original text by the author on Printables
<p><br>If You want, give me little design tip. <a href="https://paypal.me/RCMAN79">https://paypal.me/RCMAN79</a></p><p>These lights are fitted delta plastik usa - SUBARU WRX 1/8 SCALE body</p><p>Body fitting: All 8th scale buggies nitro and Electric</p><p>need support</p><p>100% infill</p><p>0.2 layer</p><p>pla impact, tpu or petg is good</p><p>rally night headlight need: 4pcs 20mm 3w ledspotlights from aliexpress</p><p>front light need: 2x5mm super led and 1x3mm super led</p><p>rear light need: 2x3mm super led</p><p>I use rc car lightset from aliexpress, about 10€</p><p>Have nice rc rally times with lights</p>
Questions and contributions