MESHOPIAModel sheet · for your workshop
Other Printer Parts & Upgrades
Raspberry Pi Display Holder
Authorship, licence & source
- Original author
- RCO_PDM
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 4 files · 3MF · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/172421
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Raspberry PI Display Holder
Purpose
This model is a bracket designed to enable a Raspberry Pi touch display to be attached to the frame of a Prusa MK3S/+
Practical Uses
It serves as a mounting solution for integrating a Raspberry Pi touch interface directly onto the printer frame.
Included Parts
- Raspberry Display Mount MK3S Frame.3mf
- Raspberry Display Mount MK3S Frame Left Side.stl
- Raspberry Display Mount MK3S Frame Right Side.stl
- Hinge.stl
- Raspberry Display Mount MK3S Frame Right Side_0.2mm_PLA_MK3S_1h54m.gcode
Printing and Assembly Guidance
The author provides a specific G-code file for the Right Side frame, intended for use with 0.2mm PLA on an MK3S printer.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.