MESHOPIAModel sheet · for your workshop
RC & Mechanics
Marker cone for radio-controlled circuits
Authorship, licence & source
- Original author
- jordan wardle
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Small cone designed to delimit RC racing tracks. It can be used to mark curves, passing points, or driving exercises in a practice area. The source does not establish a fixed scale, so the size must be chosen according to the vehicle and the visibility required on the circuit.
Preparation, compatibility, and printing
Check that the base remains flat and that the tip details are reproduced in the laminator. If you change the scale, check the wall thickness and the stability of the cone. To prepare several units, leave sufficient spacing between pieces and verify the first layer. No material, layer, or infill have been documented; this is not for real road signage.
Manufacturing & assembly notes
Check that the base remains flat and that the tip details are reproduced in the laminator. If you change the scale, check the wall thickness and the stability of the cone. To prepare several units, leave sufficient spacing between pieces and verify the first layer. No material, layer, or infill have been documented; this is not for real road signage.
Declared changes from the original
Imported CC0 model with an automated editorial listing; the generated photographic cover is pending.