Model information
Description
A tool designed to assist with the "CR Touch error, please contact customer service" issue on the Ender 3 V3 SE, specifically to help pull the CR-Touch pin up and down to address a stuck pin.
Print Requirements:
- Filament Type: PETG or ABS
- Infill: 100%
- Layer Height: 0.1 mm
- Speed: below 30mm/s
- Adhesion: No
Original text by the author on Printables
<p>“CR Touch error, please contact customer service”</p><p>The problem of CR Touch in Ender series model 3 V3 SE as many people might experienced, and many people tried countless of method or techniques to address this stuck-CR-pin. One of the most popular method is using plier or something-like to pull the CR-Touch pin up to down and repeat, then restart the printer to solve the issues.</p><p><strong>I believe many people might suffer with that method, so today I designed a Pulling Pin Assistants to help you out.</strong></p><p><i>Print Requirements:</i></p><ul><li>Filament Type -PETG or ABS</li><li>Infill - 100%</li><li>Layer Height - 0.1 mm </li><li>Speed - below 30mm/s</li><li>Adhesion - No </li></ul>
There are no comments yet. Verified ratings and makes appear separately below.