MESHOPIAModel sheet · for your workshop
Prusa Parts & Upgrades
Prusa XL Buddy cover for 80x80 fan and a DC barrel jack
Authorship, licence & source
- Original author
- pinplate
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STL · STEP
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1089869
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
This model is a remix of the "Prusa XL Buddy cover" designed to accommodate an 80x80 fan and a DC barrel jack. Its purpose is to provide a customized housing for these specific components on a Prusa XL printer.
Practical uses include upgrading the printer's cooling or ventilation setup. If using a 24V fan, it can be powered directly from the XL board.
Included parts:
- PrusaXL_Cover_Fan_80x80.stl
- PrusaXL_Cover_Fan_80x80.step
Printing and assembly guidance:
To mount the fan, four screws with countersunk heads (M4x14 or longer) and nuts are required. Because the rear side of this remix is thicker, the original Buddy cover screws must be replaced with longer M3x12 screws.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.