MESHOPIAModel sheet · for your workshop
RC & Robotics
Pipe Load for Turbo Racing 1/76 scale C50 Semi Truck
Authorship, licence & source
- Original author
- Printoptiontwo
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 6 files · STL · 3MF
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1143580
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Trucks & Trailers
- Project type
- Functional RC
- Scales
- 1:76
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
Pipe Load for the Turbo Racing 1/76 scale RC C50 Semi Truck
Purpose
This model serves as an alternative cargo load for the Turbo Racing 1/76 scale C50 semi truck trailer, providing an option other than the standard container or empty trailer configurations.
Practical Uses
Designed for use with the Turbo Racing C50 scale model, this load can be weighted to match the nose weight of the original box container. Users can add an M10 steel full nut into the provided cutout to achieve the necessary weight, using a small piece of Blue Tack (poster putty) to prevent rattling.
Included Parts
- Pipe load
- Tie-down straps (Version 1: exact shape; Version 2: optimized for neater printing)
Printing and Assembly Guidance
Print the pipes standing vertically. A color change can be implemented during printing to create colored protective end caps. The pipes are attached to the trailer using a narrow strip of double-sided tape. The tie-down straps clip into place over the pipe load and the trailer bed. If using Strap Version 2, the center section must be cut out with side cutters to match the shape of Version 1.
Author's Print Settings
- Material: PLA
- Layer height: 0.2mm
- Perimeters: 2
- Top/Bottom layers: 4
- Infill: 15%
- Supports: None
- Printer used: Prusa Mk3S+
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.