P-51 Mustang printable RC airframe from a separate source set labelled with a 1090 mm wingspan. The design has a streamlined fuselage, low wings, canopy area and conventional tail, with segmented components and alternate source part variants.

PACKAGE CONTENTS
The ZIP contains 28 unique original STL files for ailerons, fuselage sections, cockpit, nose, engine-section geometry, stabilizers, tail sections, servo mount and wing sections, with new English filenames and an English source-label guide. Exact byte-identical duplicates are supplied once. Original STL bytes and coordinates are unchanged. The viewer shows one source component in its original printing pose. Download the complete ZIP for all parts.

DESIGN AND ASSEMBLY
This is a separate source-labelled 1090 mm airframe design. It is not a confirmed interchangeable variant of the existing 3DLabPrint P-51D listing. Alternative files remain separate designs and should not all be assembled simultaneously. Select a consistent configuration, inspect dimensions, thin walls, hinge gaps, component fit, supports and print orientation, and supply appropriate purchased hardware and electronics. The 1090 mm designation comes from the source collection name; MESHOPIA has not independently verified the assembled wingspan. Motor, propeller, radio, battery, electronics and purchased hardware are not included. Printing, physical assembly, balance and flight readiness have not been tested.

ORIGINAL MESHOPIA PRESENTATION
The cover was generated locally in ComfyUI using this kit’s assembled source visualization, with a new teal finish, realistic printed surfaces, camera, lighting and neutral studio background. It illustrates the airframe, without an added propeller or landing gear.