Información del modelo
Descripción
OpenRC 1:10 RC Truggy Rim for Monster Truck 10-Spoke Tires
Purpose
This model is a remix of the original OpenRC 1:10 4WD Truggy Concept RC Car Rims. It is specifically redesigned to be compatible with HobbyKing 1:10 Monster Truck 10-Spoke tires.
Practical Uses
By utilizing these rims with the specified HobbyKing tires, the vehicle achieves a much wider stance. This modification is intended to provide improved stability during turns.
Included Parts
- truggy_rim.stl
Printing and Assembly Guidance
Recommended print settings include using no supports and an infill of 100%. The use of rafts is listed as "Doesn't Matter."
Regarding materials, the author used PETG and notes that ABS will be fine. The author has no experience using PLA for this model.
Texto original del autor en Printables
<p>This is remix of original OpenRC 1:10 4WD Truggy Concept RC Car Rims.<br/>
I used HobbyKing tires:<br/>
<a href="https://hobbyking.com/en_us/hobbykingr-1-10-monster-truck-10-spoke-black-wheel-block-pattern-tire-12mm-hex-2pc.html">https://hobbyking.com/en\_us/hobbykingr-1-10-monster-truck-10-spoke-black-wheel-block-pattern-tire-12mm-hex-2pc.html</a></p>
<p>And adjust create new rims compatible with original parts.<br/>
Car is much wider and has better stability in turns.</p>
<h3>Print instructions</h3><h3>Category: R/C Vehicles Print Settings</h3>
<p><strong>Rafts:</strong> Doesn't Matter</p>
<p><strong>Supports:</strong> No</p>
<p><strong>Infill:</strong> 100%</p>
<p><strong>Notes:</strong></p>
<p>I used PETG. ABS will be fine too. No experience with PLA.</p>
Preguntas y aportaciones