MESHOPIAModel sheet · for your workshop
Other Printer Parts & Upgrades
Moveable endstop plate for CR-10
Authorship, licence & source
- Original author
- Chron-O-John
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · 3MF
- Declared source
- Printables
- Source link
- https://www.printables.com/model/491636
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Moveable endstop plate for CR-10
Purpose
This model serves as an alternate mounting plate for the endstop on a CR-10 printer. It is designed to allow the endstop to be moved up and down to correct height issues.
Practical Uses
This part is intended for use when the endstop position is too high, specifically in scenarios where silicone spacers have been used in place of springs.
Included Parts
- Endstop Mover (.3mf file)
Assembly Guidance
The endstop is mounted to this plate using M3 inserts.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.