MESHOPIAModel sheet · for your workshop
RC & Robotics
MN82 Steering mod
Authorship, licence & source
- Original author
- IcoAngelov
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1463637
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
MN82 Steering mod
Purpose
This modification is designed for the MN82 RC model to increase the available steering angle. It achieves this by allowing the user to utilize the last bolt holes of the servo.
Practical Uses
This mod is intended for RC enthusiasts looking to improve the maneuverability of their MN82 vehicles. While the designer based the geometry on the MN82T variant, they indicate it is likely compatible with other MN82 variants.
Included Parts
- steering v4.stl
Printing and Assembly Guidance
Assembly involves repositioning the servo to use the furthest available bolt holes to facilitate the increased steering range. Please note that compatibility with non-T variants is based on the designer's assessment.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.