Información del modelo
Descripción
MJX HYPER GO RC model steering arm and suspensions hooks
Purpose
These hooks are designed specifically as replacement parts for the MJX HYPER GO RX RC car.
Practical Uses
They serve as replacement steering arm and suspension hooks for the MJX HYPER GO model.
Included Parts
- MJX HYPER GO steering arm hook
- MJX HYPER GO suspension hook
Printing and Assembly Guidance
The author recommends printing the hooks in a horizontal orientation for best results. Based on the author's reported settings using eSun PETG-CF filament, the following parameters were used:
- Infill: 100% with concentric patterns
- Speed: 50mm/s constant speed for all printing fields
- Temperature: 255°C nozzle / 70°C bed
Users may refer to the provided QiDi studio setting screenshots for additional configuration details.
Texto original del autor en Printables
<p>I designed these hooks specifically for my MJX HYPER GO RX car.</p><p>I printed them with eSun PETG-CF filament, using 100% infill, concentric patterns, and a low, constant speed (I used 50mm/s for all printing fields, 255°C/70°C).</p><p>For the best results, I recommend printing the hooks in a horizontal orientation. You can refer to the attached screenshots for my QiDi studio settings.</p>
Preguntas y aportaciones