This source-labeled military jet display model is based on the supplied source collection. The inspected native scene depicts a swept-wing airframe, a pointed nose and raised canopy, upright rear fins, underwing source components, exterior panel details and deployed wheeled landing gear. It is presented as a static miniature subject. No operating mechanism, flight capability, physical print or tested assembly is claimed.

DOWNLOAD CONTENTS
The ZIP preserves the editable Blender 5.2 and FBX projects, all associated functional textures and both attached OBJ display variants. Geometry, UVs, materials, bones and scene links are compared after reopening the native files. The original source photograph is replaced by the current locally generated completed-display image. An English guide and file inventory accompany the resources. OBJ surfaces are retained at their supplied resolution; no physical print or scale is certified.

NATIVE APPEARANCE AND DISPLAY
The corrected cover uses the supplied native FBX scene and its associated image resources. A separate inspection copy was prepared with format-aware resource-path remapping. Its non-path scene data were checked against the source, and its local image resources were verified by hash. The corpus files were not modified. This native scene is a supplied source variant; it is not a claim that every alternate format contains identical geometry.

The presentation retains the supplied dark gray and black camouflage, gold-tinted existing canopy, dark tyres, red component accents, original roundels and source number 782. The exact real aircraft type and historical paint match are unverified. This is presented as the supplied fictional/source-labeled design, with its original artwork retained. A rigid +90-degree X rotation of the complete source scene makes the canopy and fins upright and puts the wheels below the body; no individual component was repositioned. No missing interior, extra opening or new vehicle component has been invented. Local AI is restricted to surface presentation, with native dark and colored paint regions protected to retain markings and detail. The board is illustration scenery and is not a downloadable printable part.

PRINTING ADVICE — UNTESTED
Inspect the full source in a slicer or mesh checker before fabrication. Check open boundaries, self-intersections, disconnected shells, wall thickness and unsupported details. Imported mesh object counts do not establish watertightness, a single printable solid, verified part separation or assembly fit. Pay particular attention to canopy edges, nose projections, gear struts, underwing components and thin wing and fin edges. Visibility in an image does not guarantee that a feature will survive printing or handling at the chosen size. Plan supports on areas that can be cleaned safely. If preparation cuts or shell separation are needed, make them on a working copy and retain the full source as a reference. Choose material, layer height, exposure or temperature and supports for your own equipment. Print a representative fine-detail sample before a full build. No tested preset, tolerance or assembly sequence is supplied.

DIMENSIONS AND SCALE
Physical units and native scale are unverified. The display OBJ is uniformly normalized for visualization. Confirm dimensions using the retained full-resolution source in your slicer. Resize by target dimension divided by current dimension multiplied by 100. For example, a confirmed 200 mm length reduced to 150 mm requires 75%; this is an arithmetic example, not a measurement of this file. For a documented original 1:N scale and target 1:T, use N divided by T multiplied by 100. No particular 1:32, 1:48 or 1:72 scale is claimed as included. Recheck minimum features and clearances after resizing.

FINISHING, IMAGE AND RIGHTS
Test primer and paint on a prepared sample. Protect the fine details during sanding, support removal and handling. Source texture artwork is not a physical decal sheet, and tiny lettering may not remain legible at the chosen print scale. The cover is made on this PC using Blender and local ComfyUI/Qwen Image Edit. It is an AI-assisted illustration of a finished painted miniature, not a photograph of a physical print. The uploader declares the source design non-AI and authorizes redistribution under CC0. The original creator was not independently identified. Physical printing, assembly fit and native scale remain unverified.

#AircraftModel #ScaleModel #3DPrinting #ModelMaking #Miniature #CC0