MESHOPIAModel sheet · for your workshop
Electronics
Replacement arm for MG995 servomotor
Authorship, licence & source
- Original author
- cohenco
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Printable arm or horn to replace the output attachment of an MG995 servomotor. It is a coupling piece between the servo shaft and the mechanism to be moved; it does not include the servomotor or the control rod. The compatibility indicated by the source is limited to the MG995 and must be verified with the specific unit, especially regarding the central splining and the fastening.
Preparation, compatibility, and printing
The author suggests a 50% infill. This data does not certify the strength of a particular print. Before assembling, check that the splining fits without force, that the screw holds the piece, and that the arm does not rub during the entire range of motion. Prepare a fit test first and avoid compensating for an incorrect fit by tightening the screw further.
Manufacturing & assembly notes
The author suggests a 50% infill. This data does not certify the strength of a particular print. Before assembling, check that the splining fits without force, that the screw holds the piece, and that the arm does not rub during the entire range of motion. Prepare a fit test first and avoid compensating for an incorrect fit by tightening the screw further.
Declared changes from the original
Imported CC0 model with an automated editorial listing; the generated photographic cover is pending.