MESHOPIAModel sheet · for your workshop
Other Printer Parts & Upgrades
MatterHackers CR-10 Door Handle
Authorship, licence & source
- Original author
- Kyle Cotton
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STEP · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/304711
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
MatterHackers CR-10 Door Handle
Purpose
This model is designed to serve as a door handle for the MatterHackers CR-10 Enclosure, functioning to keep the door closed tightly without excessive pressure or large air gaps.
Practical Uses
It is intended for use on a CR-10 enclosure to manage door closure. The author notes that when using low infill and self-tapping type screws, the screws can be driven directly into the printed material (such as PLA).
Included Parts
The download includes a STEP file (MatterHackers_Enclosure_Handle.step) to allow for customization of the holes, and an STL file (MatterHackers_Enclosure_Handle_V2.stl).
Printing and Assembly Guidance
The author reports that the part prints in under an hour. For printing, a minimum of four top and bottom shells is recommended. The author used 5% infill for their version. Note that printing at high speeds may result in underextrusion. To customize the holes using the STEP file, separate the top from the bottom and export them as individual STL files.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.