MESHOPIAModel sheet · for your workshop
RC & Robotics
Lipo Volt Check Holder
Authorship, licence & source
- Original author
- Skouds RC 3D
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/906119
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose
This model is a small holder designed to secure a battery voltage checker in place to prevent it from moving while using an RC.
Practical Uses
The holder can be glued to various surfaces for mounting. It can be used without screws, though screws can be used if desired. The author notes that the fit is easy if the part is not painted, but becomes a hard fit if paint is applied.
Included Parts
- volt check holder.stl
Printing/Assembly Guidance
The part measures 30x16x17mm. It is designed to be glued anywhere.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.