Model information
Description
LGX Lite CR-6 SE Perch Mount for Micro Swiss Hotend
Purpose
This model is designed to make the Bondtech LGX Lite perch mount compatible with the Micro Swiss all-metal hotend. It modifies the standard mount to accommodate the specific dimensions of the Micro Swiss hardware.
Practical Uses
This mount is intended for use on the CR-6 SE printer. It allows for the integration of the LGX Lite extruder with a Micro Swiss all-metal hotend by providing a modified mounting interface.
Included Parts
- LGX Lite Strain Gauge Mount MicroSwiss.stl
- LGX Lite CR-6 Mount MicroSwiss.stl
Assembly Guidance
The model features an expanded hole measuring 8.3mm to accommodate the top of the hotend. To install, remove the compression nut from the top of the hotend so that the mount can slip over the threaded protrusion.
Original text by the author on Printables
<p>This model makes the Bondtech created LGX Lite perch mount compatible with the Micro Swiss all metal hotend. </p><p>The hole has been expanded to 8.3mm to accommodate the top of the hotend. Remove the compression nut from the top and this slips over the threaded protrusion.</p>
Questions and contributions