Modular Off-Road SUV — Complete CAD Assembly & Source Collection

OVERVIEW
A complete digital CAD collection for a detailed brick-built off-road SUV, accompanied by a coloured, upright display assembly. The recovered scene contains 2,655 supplied CAD shape instances, including the body panels, technical frame, seats, roof rack, accessories, lamps, mirrors, connector pins, four road wheels and the genuine rear spare wheel. No missing hardware or decorative component has been invented.

DOWNLOAD CONTENTS
The source archive preserves all 318 supplied entries, representing 313 unique payloads: 303 Inventor part documents, six Inventor assemblies, one STEP assembly, two historical reference PNG images and six folder-metadata INI files. The retained STEP contains the original CAD representation. A separate generated Blender project and full coloured 3MF contain all 2,655 recovered instances and 7,248,688 derived triangles. Eight coincident source-derived triangles omitted by the earlier OBJ importer have been restored. The original CAD documents remain unchanged; the triangular display is a tessellated approximation, not a replacement for the original CAD surfaces. Tessellation used 0.4 mm absolute linear deflection and 0.6 radians angular deflection.

The browser navigation copy is reduced independently per component and grouped by paint to reduce drawing overhead. Every supplied assembly instance remains represented, but small holes and fine edges may be approximated. Use the full 3MF or original CAD documents for detailed inspection and fabrication planning. Neither the reduced viewer nor a rendered image certifies a working mechanism.

DIMENSIONS AND SCALE
The upright digital representation measures approximately 221.442 mm wide, 440.385 mm long and 237.225 mm high. These are measurements of the supplied CAD geometry, after a proper orientation change without resizing. The old rendering scene used normalized presentation coordinates; those coordinates are not source millimetres. The dimensioned native and full 3MF use the recovered original millimetre size. No independently calibrated scale relative to a full-size vehicle or factory brick dimensions is claimed. To make a static display 220.192 mm long, uniform 50% scaling gives approximately 110.721 mm width and 118.612 mm height. Scaling changes every hole, wall, pin and clearance and does not validate physical brick compatibility.

NATIVE FILES AND DEPENDENCIES
The outer packages and generated native mesh nodes use opaque identifiers. Original Inventor technical filenames, piece numbers, colour labels and relative directory aliases remain where required to preserve native references. This is a technical compatibility exception; there is no promise that geometry or necessary native identifiers are anonymous. All supplied native bytes, notices and source design identifiers are retained.

Untested. Source CAD parts and all original native aliases retained. Inspect units, thin connectors, support access and clearances in your own CAD software and slicer. Test small pin and axle coupons. No physical printing, fit, load capacity or mechanism certification; original Inventor GUI dependency compatibility is not certified.

Prepared for display and download. No physical print has been certified.