Model information
Description
30 × 30 cm foldable platform for small drones, with a landing signal and DJI logo in the original design. The author describes an assembly using 16 magnets. It is a modeling support surface, not a guidance system or a guarantee of automatic landing.
Preparation, compatibility, and printing
The source cites magnets 10 mm wide and 3.5 mm deep, while its purchase reference points to 10 × 4 mm. Measure the housings before buying or inserting the magnets and check the polarity of each joint. Check the different pieces and their folding. Material, layer, and infill are not specified; verify that the assembled platform remains flat and stable.
Original text by the author on Printables
A foldable, ultra-portable 30x30 cm landing pad featuring a visible 'H' marking and the DJI logo. Ideal for smaller dron
To assemble the landing pad, you will need 16 neodymium magnets measuring 10mm in width and 3.5mm in depth. Here is a link to the AliExpress listing: (https://www.aliexpress.com/item/1005009069030764.html?spm=a2g0o.order_list.order_list_main.15.7cc41c242Zhqt5) https://www.aliexpress.com/item/1005009069030764.html?spm=a2g0o.order_list.order_list_main.15.7cc41c242Zhqt5 (select 10x4m)
There are no comments yet. Verified ratings and makes appear separately below.