Model information
Description
The author provides a design for RC snow tires featuring approximately 80 spikes. The author originally designed them for a 2wd amp ecx dune buggy, but states they can work with any other RC car with minor adjustments.
Printing instructions: The pre-sliced version is designed for the original Prusa Mini + using PLA filament. The author reports that the design tends to un-stick from the heatbed and suggests watching it intently. The author used glue to hold it on and found that a heatbed temperature of 70 degrees Celsius helped it stick better when using PLA filament.
Files: Snow tires for RC car.stl, Snow tires for RC car_0.15mm_PLA_MINI_8h47m.gcode
Original text by the author on Printables
<p>RC vehicle owners from all across the nation, behold my insanely crazy RC snow tires. Not gonna lie, they look pretty scary. Equipped with probably 80 or so spikes, (?) These tires are absolutely legendary. You could probably use them for construction. Don't quote me on that. I originally designed them for my 2wd amp ecx dune buggy, but they can work with any other RC car with minor adjustments. The .STL file should be downloadable, and hopefully you can slice it on any slicing app. The pre-sliced version is designed for the original prusa mini +, using the PLA filament. The design tends to un-stick from the heatbed, so be sure to watch it intently. I used glue to hold it on, which probably was a bad idea. Using PLA filament, I found that having the heatbed temp at 70 degrees celcius helped it stick a lot better. I put this design under public domain in hopes that it will go viral, but if you manufacture it commercially, just give me like 2%, sound good? Good luck, hope you enjoy!</p>
There are no comments yet. Verified ratings and makes appear separately below.