MESHOPIAModel sheet · for your workshop
RC & Robotics
ImpulseRC APEX 5 Arm Motor Guard Bando
Authorship, licence & source
- Original author
- Szymon Szpularz
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/879779
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
ImpulseRC APEX 5 Arm Motor Guard Bando
Purpose
This model is designed as a motor and arm guard specifically for the ImpulseRC APEX 5 drone. It is intended for use in "bando" (abandoned building) environments to provide protection for the motors and arms.
Practical Uses
These guards are compatible with any motors that have a diameter not exceeding 30mm (the designer used 2207.5 motors for fitment). They serve to shield the drone's components during crashes or contact with obstacles.
Included Parts
- Motor Guard.stl
Printing and Assembly Guidance
For optimal results, the following print settings are recommended:
- Material: TPU
- Infill: 30%
- Walls: 3
- Supports: Touching Buildplate
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.