Model information
Description
HRS-550 High Torque DC Motor to 5mm Shaft
Purpose
This adapter is designed to allow for the attachment of a coupling or similar component to an HRS-550 DC motor. It is intended for use when the motor's original gear is removed to provide a simple shaft interface.
Practical Uses
It serves as an interface for users who require a standard 5mm shaft on an HRS-550 motor. The author notes that the input gear diameter is 8.8mm. The adapter includes screw holes to lock it to the motor, though the author reports a sufficient fit can be achieved without using the screws.
Included Parts
- Motor Adapter.stl
- Motor Adapter.step
Printing and Assembly Guidance
The author suggests that the hole size may need to be adjusted (made larger or smaller) depending on specific requirements. For assembly, the author notes that if the motor comes with a gear on the shaft, it can be removed using pliers and heat.
Original text by the author on Printables
<h3>well, if you use heat, the gear can be removed with pliers, so do that instead.</h3><p>Most HRS-550 DC Motors come with a gear on its shaft, in most cases you just want a simple shaft that you can attach a coupling or similar to it, this part allows you to do just that!</p><p>i included screw holes to lock the adapter to the motor but in my case the fit is good without the screws, you might want to make the hole a bit bigger or smaller if you need too.</p><p>Dimensions {</p><p> Input gear diameter 8.8mm</p><p> Output shaft diameter 5mm</p><p> Output shaft length 10mm</p><p>}</p><p>i included a .STEP file so you can edit it if you want</p>
Questions and contributions