Model information
Description
An adapter that allows for the attachment of a coupling to an HRS-550 DC motor. The author notes that most HRS-550 DC motors come with a gear on the shaft; if heat is used, the gear can be removed with pliers. The author included screw holes to lock the adapter to the motor, though they report that in their case, the fit is good without the screws. The author suggests that the hole size may need to be adjusted (larger or smaller) depending on requirements.
Dimensions provided by the author:
- Input gear diameter: 8.8mm
- Output shaft diameter: 5mm
- Output shaft length: 10mm
Files included: Motor Adapter.stl, Motor Adapter.step
Original text by the author on Printables
<h3>well, if you use heat, the gear can be removed with pliers, so do that instead.</h3><p>Most HRS-550 DC Motors come with a gear on its shaft, in most cases you just want a simple shaft that you can attach a coupling or similar to it, this part allows you to do just that!</p><p>i included screw holes to lock the adapter to the motor but in my case the fit is good without the screws, you might want to make the hole a bit bigger or smaller if you need too.</p><p>Dimensions {</p><p> Input gear diameter 8.8mm</p><p> Output shaft diameter 5mm</p><p> Output shaft length 10mm</p><p>}</p><p>i included a .STEP file so you can edit it if you want</p>
There are no comments yet. Verified ratings and makes appear separately below.