Model information
Description
Holder for HW-140 DC-DC Volt LCD Display
Purpose
This model is designed to provide a permanent mounting solution for a HW-140 DC-DC Volt LCD Display. It was specifically developed to monitor the battery voltage of a 160 GS (y1963) scooter without interfering with normal vehicle operation.
Practical Uses
It can be used to install a voltmeter under the seat of a vintage Vespa scooter or other mobile devices to monitor electrical levels. The setup includes a push switch to allow the user to activate the measurement on demand.
Included Parts
The assembly consists of two main components:
- A case for the voltmeter that clips into a second mounting part.
- A mounting part designed to be attached to the scooter using the two original nuts used to fix the fuel tank.
Printing and Assembly Guidance
The model is provided in two files: Holder_HW140DCDC_3a.stl and Case_HW140DCDC_3a.stl. Regarding printing, the author states that the top part of the case should be printed with support everywhere. No specific printing instructions are provided for the lower part.
Original text by the author on Printables
<p>As I suspect problem with the voltage level of the battery of my scooter (160 GS - y1963), I decide to install a permanent voltage meter under the seat. The assembly does not interfere with the normal use. A push switch allows to activate the measurement on demand. </p><p>The model includes the case with the voltmeter which clips into the second part. The latter is attached to the scooter with the original 2 nuts used to fix the fuel tank.</p><p>The case has 2 parts: No specific printing instruction for the lower one but the top one should be printed with support everywhere.</p>
Questions and contributions