MESHOPIAModel sheet · for your workshop
RC & Robotics
HO scale 4% grade for Marklin C Track
Authorship, licence & source
- Original author
- Dingo_aus
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 8 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/41524
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose: This model provides a basic 4% grade designed to be placed under HO track to create an incline. 1. Practical Uses: It is used to establish a consistent slope for HO scale model railroading. 2. Included Parts: 4pct_basic_1.stl, 4pct_basic_2.stl, 4pct_basic_3.stl, 4pct_basic_4.stl, 4pct_basic_5.stl, 4pct_basic_6.stl, 4pct_basic_7.stl, 4pct_basic_8.stl. 3. Printing/Assembly Guidance: The designer recommends a 5% rectangular infill and testing between 0.15 and 0.3 printing heights. It is advised to avoid using a 0 bottom layer option to prevent the print from detaching from the base plate, unless a large brim is included.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.