MESHOPIAModel sheet · for your workshop
RC & Robotics
Harbor Tug Parat: Mooring Bitt Inner Part
Authorship, licence & source
- Original author
- Wiggeli
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/645955
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose
This model represents the inner part of the mooring bitt for the harbor tug Parat. It includes a small added step to facilitate the gluing of the outer part.
Practical Uses
Users can choose to print the full height or stop the print at 5.6 mm or 5.8 mm if the modified height is not desired. At 5.8 mm, the model features a slightly wider edge.
Included Parts
Leinenkluese.stl
Printing and Assembly Guidance
Print with a layer height of 0.2 mm and select the Arachne wall generator in the slicer. The author used Prusament PLA Gravity Grey, noting it matches agate grey (RAL 7038) deck colors.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.