MESHOPIAModel sheet · for your workshop
Electronics
Generic DC Power Supply Wall Mount
Authorship, licence & source
- Original author
- Zero Day
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 4 files · STL · STEP
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1281445
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Generic DC Power Supply Wall Mount
Purpose
This model is a case designed to enclose a generic 12V power supply unit (PSU) and mount it to a wall. It is intended to fit most standard standalone power supplies used in 3D printing, such as Mean Well models. The design features ventilation holes, though one side lacks holes to prevent dust collection inside the PSU. A specific hole is included to allow visibility of the status indicator light.
Practical Uses
This case is used for organizing and securing power supplies on a sturdy surface. It allows for easy access to connectors while keeping the unit enclosed. The design includes a cap to close off the open side of the case.
Included Parts
- Power Supply Mount - Case
- Power Supply Mount - Cap
Printing and Assembly Guidance
For printing the case, use tree supports and an infill of ≥ 15% with ≥ 2 walls. When printing the cap, it is recommended to print at under 100% scale depending on your printer's accuracy and filament. Users should consider the thermal properties of their chosen filament against the heat generated by the PSU.
To assemble, disconnect the power, install the case on a surface using screws (5mm diameter holes), and slide the PSU in so connectors are accessible and ventilation patterns match. If using the cap, snap it into place via friction fit. To remove the PSU, disconnect power and push the unit from the covered side; if the cap is installed, it should pop off with the force of the PSU.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.