MESHOPIAModel sheet · for your workshop
Accessories
Generic base for adaptations Sunlu S2 (CR-10S Pro filament sensor version) DO NOT USE!! Files: Adapter.stl, adapter.step
Authorship, licence & source
- Original author
- PORCOMASTER
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STL · STEP
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1043570
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
This model serves as a generic base designed for various adaptations on the Sunlu S2. Its primary purpose is to move a filament sensor closer to the Sunlu S2 printer.
Practical uses include mounting a filament sensor, specifically the version designed for the CR-10S Pro. However, the author notes that this specific version may not be perfectly aligned for all sensors. The base is designed to be used with Voron M3 inserts, though this can be modified.
Included parts:
- Adapter.stl
- adapter.step
Printing and assembly guidance:
The author reports that the fit is very tight and snaps into place. Because the design is tight and may require alignment adjustments, the author provides the .step file to allow users to modify the holes for a custom, adaptable base. If using the design as-is, the author advises adding at least 0.5-1mm to the extended arm and fixing the hole distance. Additionally, changing all holes by 0-1mm may assist with alignment, though the design does not add pressure to the filament itself.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.