Model information
Description
FrSky Taranis Q X7 Travel Case
Purpose
This model is a travel case designed for the Taranis Q X7 radio, intended for transporting the device to flight locations and for home storage.
Practical Uses
The case features a locking tab at the bottom and a 25mm wide Velcro strap at the top to secure the lid. It includes loops designed to hold a carrying strap up to 25mm wide. The design provides internal wiggle room to accommodate user-added padding. A specific 'Storage version' is available, which includes a 25mm x ~200mm section intended for a neck strap and charging cable.
Included Parts
The model files include components for both the standard and storage versions: Top, Bottom, and 'Thingy' components.
Printing and Assembly Guidance
According to the author, printing the case took approximately 12 hours using 600g of PETG. Assembly requires two M5x15 bolts and the 'Thingy' component to secure the Velcro strap in place.
Original text by the author on Printables
<p>A case for transporting my radio to and from flight locations and storing it at home. </p><p>It has a locking tab at the bottom and a Velcro strap (25mm wide) up top to keep the lid secured. Also has loops for a carrying strap (Up to 25mm wide). Two M5x15 bolts are used to keep the Velcro strap in place using the 'Thingy’. </p><p>The case has some wiggle room inside to accommodate for padding that was not yet added in the photos.</p><p>Printing took about 12hrs and 600g of PETG.</p><p>The Storage version has a 25mm x ~200mm section for the neck strap and charging cable</p><p> </p><p> </p><p> </p>
Questions and contributions