Model information
Description
A travel case for a Taranis Q X7 radio, intended for transport to flight locations and home storage. The design features a locking tab at the bottom and a 25mm wide Velcro strap at the top to secure the lid. It includes loops for a carrying strap up to 25mm wide. Two M5x15 bolts are used with the 'Thingy' component to secure the Velcro strap. The author notes the case has internal wiggle room to accommodate padding (not included in photos). The 'Storage version' includes a 25mm x ~200mm section for a neck strap and charging cable. The author reports printing took approximately 12 hours using 600g of PETG.
Original text by the author on Printables
<p>A case for transporting my radio to and from flight locations and storing it at home. </p><p>It has a locking tab at the bottom and a Velcro strap (25mm wide) up top to keep the lid secured. Also has loops for a carrying strap (Up to 25mm wide). Two M5x15 bolts are used to keep the Velcro strap in place using the 'Thingy’. </p><p>The case has some wiggle room inside to accommodate for padding that was not yet added in the photos.</p><p>Printing took about 12hrs and 600g of PETG.</p><p>The Storage version has a 25mm x ~200mm section for the neck strap and charging cable</p><p> </p><p> </p><p> </p>
There are no comments yet. Verified ratings and makes appear separately below.