Two-piece printed assembly to convert the front suspension of the Sakura D5 to a mono-shock configuration. The source indicates that the holes allow for adjusting the axle play and mentions two M3 35 mm screws. It is not a complete suspension: the rest of the assembly depends on the vehicle and the associated components.

Preparation, compatibility, and printing

Compare the holes with the actual pins and screws before finishing the adjustment. No universal clearance or validated print profile is provided. Check wall continuity and pivot zones in the slicer, avoiding supports that are difficult to remove inside the holes. Once the assembly is presented, check symmetry, rotation, travel, and static interference. The cover shows the parts in an illustrative context; it does not certify a tested assembly or an improvement in car performance.