Información del modelo
Descripción
This model is a redesigned servo arm specifically for a 25kg servo upgrade on the FTX Ravine.
Purpose
The arm is designed to accommodate a 25kg servo located at the front of the Ravine. Because the servo has been flipped in this configuration, the arm is designed with a shorter profile to suit the specific orientation.
Practical Uses
To allow for a full range of motion, the arm is designed to stand off from the steering arm by a significant distance. This clearance helps prevent mechanical interference during steering maneuvers.
Included Parts
The files provided include:
- ravine front steer arm.3mf
- rev1.2.step
Attribution: danchee
Texto original del autor en Printables
<p>Here's a servo arm for a 25kg servo on the FTX Ravine! hope it helps bare in mind the server is on the front of the ravine and has also been flipped so the servo arm is shorter, the servo arm stands off the steering arm quite bit to allow for the full range of motion.</p>
Preguntas y aportaciones