Información del modelo
Descripción
FRC Robot Handle
Purpose
This model is a handle designed for mounting to an Andymark AM14U5 KOP chassis. According to the author, a set of four handles can support a 100-pound robot, though they should be capable of handling up to 125 pounds.
Practical Uses
It is intended for use in FRC (FIRST Robotics Competition) applications to provide a grip point for maneuvering a robot chassis.
Included Parts
- Robot Handle (STL file)
Printing and Assembly Guidance
To print this model, use PLA material with a 15% infill density. The part should be oriented laying down on the print bed. No supports are required for printing.
Assembly requires 10-32 1" long bolts for mounting to the chassis.
Texto original del autor en Printables
<p>Handle designed to be mounted to Andymark AM14U5 KOP chassis. Mounts with 10-32 1" long bolts. 4 handles could support a 100 pound robot, but they should be able to handle up to 125 pounds.</p><p>Material: PLA</p><p>Infill Density: 15%</p><p>Supports: No</p><p>Orientation: Laying down on print bed</p>
Preguntas y aportaciones