MESHOPIAModel sheet · for your workshop
RC & Robotics
FPVWRA spec wing hot wire templates (naca 0014)
Authorship, licence & source
- Original author
- FPV3D
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 5 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/319175
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose: These templates are designed for hot wire cutting an FPVWRA Spec Wing using a NACA 0014 airfoil profile.
Practical Uses: The templates are used to guide the hot wire cutting process to achieve the correct wing sweep and shape.
Included Parts:
- Spec wing 1.STL
- Spec wing 2.STL
- Spec wing 3.STL
- Spec wing 4.STL
- FPVWRA center template.STL
Printing/Assembly Guidance: The author instructs to make the templates from plywood. To assemble the cutting setup, cut four blocks 228.7mm wide. Mark where the pointer is on the inboard template, mark square across the block, and position the next template inline with this mark to create the correct sweep.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.