MESHOPIAModel sheet · for your workshop
RC & Robotics
FPV Upgrade for ZOHD Altus – Magnetic Nose for Walksnail Moonlight
Authorship, licence & source
- Original author
- filch20049
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · OBJ
- Declared source
- Printables
- Source link
- https://www.printables.com/model/1455327
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Aircraft, Helicopters & Drones
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
FPV Upgrade for ZOHD Altus – Magnetic Nose for Walksnail Moonlight
Purpose
This 3D-printed nose is designed specifically for the ZOHD Altus FPV aircraft. It serves as a dedicated mount for the Walksnail Moonlight unit (camera and VTX) and attaches to the fuselage using magnets, eliminating the need for screws or glue.
Practical Uses
Providing an aerodynamic and closed front to protect electronics, the design includes built-in ventilation and antenna holes suitable for dual antenna setups. It is engineered to allow easy access to the SD-Card and the bind button.
Included Parts
- 3D model: Zohd Altus Nose Walksnail.obj
Printing and Assembly Guidance
For printing, the author suggests using any material and any layer height. Supports are not required. The recommended print orientation is with the nose facing down. The author reports a weight of 43 grams when printed in solid PLA and 18 grams in LW-PLA.
Assembly requires neodymium magnets. While the parts list specifies 8× Ø6 × 3 mm magnets, the author recommends using 4× Ø6 mm × 3 mm magnets for attachment to the fuselage.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.