MESHOPIAModel sheet · for your workshop
RC & Robotics
FPV Toothpick battery mount and stack
Authorship, licence & source
- Original author
- rcrdps
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 4 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/550970
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Aircraft, Helicopters & Drones
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
FPV Toothpick battery mount and stack designed to mount two whoop batteries and provide M2 screws for a stack. 1. Purpose: This model serves as a battery mount for toothpick-style FPV drones and includes components for stack mounting. 2. Practical Uses: It is used to secure two whoop batteries and provides integrated support for M2x25mm Nylon or Acrylic screws. 3. Included Parts: The file set includes Toothpick Battery Mount.STL, O3-AirUnit-Spacer.STL, O3-AirUnit-Top-Spacer.STL, and O3-AirUnit-to-frame.STL. 4. Printing/Assembly Guidance: The author reports that when using clear resin, the material bleeds through and can cause blobs at the bottom part of the threads, requiring reduced tolerances. The author has printed the model in Syria Tech Blue/Black and suggests that Syria Tech Sculpt, an opaque high-strength resin, is a preferred material for future prints.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.