MESHOPIAModel sheet · for your workshop
RC & Robotics
Foam Plane Skewer Washer
Authorship, licence & source
- Original author
- Gecko Boi
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · 3MF
- Declared source
- Printables
- Source link
- https://www.printables.com/model/517198
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Foam Plane Skewer Washer
Purpose
This model is a skewer washer designed for use in DIY foam RC plane models. Its primary function is to help guide and hold skewers in place while reducing wear on the foam material.
Practical Uses
These washers are intended for RC aircraft construction. The author provides an example of this part being used on the FT Simple Cub from FliteTest.
Included Parts
- Skewer_Washer.3mf
- Skewer_Washer_Modified.3mf
Assembly Guidance
To install, first make a skewer hole in the foam to align the washer. Apply a few dabs of hot glue onto the washer, then push it into the foam board until it is flush with the surface.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.