Información del modelo
Descripción
Purpose
This is an experimental flying wing model designed for flight testing. The author notes that flight characteristics are currently unknown.
Practical Uses
The model is intended for use as a small-scale flying wing. The author suggests scaling the model up if you intend to use it for specific projects.
Included Parts
- flying-wing 3.0-v1.stl
Printing and Assembly Guidance
The model does not include slots for electronics. The author has included supports on the bottom of the hull. The base dimensions are 95.25 mm x 97 mm with a height of 107 mm.
Texto original del autor en Printables
<p>This is a very experimental project of mine (i haven't printed this yet) you can only hope everything prints correctly, when assembled it will look like just one wing, although this is meant to be a flying wing. Right now I am unsure of it's flight characteristics. Also this doesn't have any slots for electronics feel free to remix because I likely won't revisit this model. And yes i did put wonky supports on the bottom of the hull. Not only this but the model is very small so if you have any plans for it probably make it bigger. Dimensions: base diameter of (95.25 mm x 97 mm) with a height of (107 mm)</p>
Preguntas y aportaciones