MESHOPIAModel sheet · for your workshop
2D Plates & Logos
Fahr tractor Logo D180H 1/10 Scale
Authorship, licence & source
- Original author
- Magig_I3Prusa
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/809120
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Agricultural & Forestry
- Scales
- 1:10
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
Purpose: This model is a logo designed for a 1/10 scale Fahr tractor model from the 1953-1959 era.
Practical uses: The logo is intended to fit the hood of a D180H model.
Included parts:
- 45a_Fahr_logo.stl
Printing/assembly guidance: The author recommends printing with a 0.12 layer height.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.