MESHOPIAModel sheet · for your workshop
Portable Devices
ESParto Cyberdeck ESP32 Remote Control
Authorship, licence & source
- Original author
- Jimbob
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 5 files · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/332425
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
The Esparto is an ESP32-based transmitter designed for controlling robots and buggies via WiFi or Bluetooth. The enclosure features an OLED screen for status indication and debugging, two dual-axis joysticks with integrated buttons, and three additional function buttons. It also includes a switched external-facing USB port to power extra or extended devices and a 10mm grid of 3mm holes for mounting future modules. The design provides easy access to the ESP32 serial port for programming and the buttons on the ESP32 board.
Included Parts:
- 1x ESP32-WROOM-32D development board
- 1x 0.91" I2C OLED screen
- 1x Battery charger board (3.3v output) for 18650 cell
- 2x Dual-axis joystick modules
- 1x Mini rocker switch
- 3x Mini momentary push button switches
- Various 2.5mm standoffs
Recommended Hardware:
- 6x 8mm nylon spacers for button mounts (or 6mm with an additional 2mm nut)
- 4x 6mm nylon spacers for battery module
- 3mm nuts used as spacers for joysticks
- Various M3 screws (author used M3x10 throughout)
Printing/Assembly Guidance:
The author printed this on a Bambu Labs X1 using a 0.2mm layer height throughout, though it can be printed on any machine. An updated OLED screen mount includes sockets for screw shafts to prevent wire interference when fitting the lid.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.