MESHOPIAModel sheet · for your workshop
RC & Robotics
ERevo 2.0 Upper Back Arm
Authorship, licence & source
- Original author
- Mikkan
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 2 files · STL · STEP
- Declared source
- Printables
- Source link
- https://www.printables.com/model/829861
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Published description
Purpose
This model is designed as a temporary replacement for ERevo arms to allow for field repairs after a crash. The author notes these are weaker than stock parts.
Practical Uses
These arms are intended to be swapped in quickly to keep driving, though the author advises driving more carefully due to their reduced strength.
Included Parts
- E Revo 2.0 Upper Back Arm v5.stl
- E Revo 2.0 Upper Back Arm v5.step
Printing Guidance
The model includes intentional gaps to address layer delamination during attachment. If the slicer is configured correctly, the printer will fill these areas with perimeters to increase strength.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.