An RC car tire designed with a no-overhang thread pattern for easier printing. Originally designed for the XRAY M18T. The author recommends using foaming filament and notes it was tested on Siraya AIR TPU. To ensure successful printing, the author advises enforcing a constant speed via a volumetric flow rate limit (e.g., 3 mm³/s) and feeding soft TPU directly to the print head to avoid friction in the PTFE tube. Users should use slicer scaling to achieve desired dimensions.
Original text by the author on Printables
<p>Scripted - ping me for specific geometry. Original design for XRAY M18T.</p><p>Primarily designed for foaming filament, tested on Siraya AIR TPU: enforce constant speed across the print via volumetric flow rate limit e.g. 3 mm³/s. Friction in the PTFE tube is a killer - feed soft TPU directly to the head.</p><p>Reality check: Have fun and drift your heart out but don't expect to win any races.</p>
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.
The publishing account has not yet confirmed any print settings. Material, supports, difficulty, temperatures and times remain as "Not verified" until verifiable data is available.
Conversation and organization
Save it with context.
Collections are used to organize projects; comments, to ask or provide information without converting it into an evaluation.
There are no comments yet. Verified ratings and makes appear separately below.
Community Evidence
Checking real impressions…
Before downloading
License
§
CC0 · Public domain
The author waives their rights to the extent permitted by law. Copying, modifying and reusing the work are permitted, including for commercial purposes.
✓ Share✓ Modify✓ Commercial use
Consult the full license ↗This summary facilitates reading and does not replace the legal conditions declared in the model sheet.
There are no comments yet. Verified ratings and makes appear separately below.