MESHOPIAModel sheet · for your workshop
RC & Robotics
DJI FPV XT60 Charging Adapter
Authorship, licence & source
- Original author
- Deeke
- Publishing account
- Meshopia
- Licence
- CC0 · Public domain · Full terms
- Availability
- Free package hosted by MESHOPIA
- Listed contents
- 1 file · STL
- Declared source
- Printables
- Source link
- https://www.printables.com/model/496912
Read the licence terms on the original listing. This sheet does not replace those terms or grant file access or additional rights.
Project documentation
- Assembly manual
- Not identified in the file list
- Bill of materials
- Not identified in the file list
Grouped by filename, without inspecting contents. Links lead to the public model listing; this sheet does not include the documents or grant access to paid downloads.
Before making: confirm additional parts, electronics, tools, scale and mounting points with the creator. A bill of materials does not establish that the assembly has been built or tested.
Print preparation
- Print status
- Not verified
Scale modelling & compatibility
- Vehicle family
- Aircraft, Helicopters & Drones
- Project type
- Functional RC
Scales and compatibility are as published. Rescaling can change tolerances, fit and hardware requirements.
Published description
DJI FPV XT60 Charging Adapter
Purpose
This model is a simple XT60 to DJI Battery adapter designed to facilitate charging a DJI FPV Battery while in the field or inside a car.
Practical Uses
It is intended for users who need to charge their DJI FPV batteries using an XT60 power source. The author reports using an ISDT charger in DC mode at 25.1V with 3.4A, though no guarantee is provided regarding performance or compatibility.
Included Parts
The package includes the DJI_Adapter.STL file.
Printing and Assembly Guidance
Assembly requires the pins from an XT60 connector. The author notes that these pins fit the printed part after a little modification and can be easily removed using a soldering iron. To complete the assembly, the user should solder another XT60 connector to the opposite end. The author suggests melting the pins into the printed part using the same soldering iron technique used to remove them.
Declared changes from the original
AI-assisted English description reviewed against the CC0 source. Original content and author attribution retained; photographs from the author's Printables model gallery.